Flat Aluminium Roller Shutter
Designed for Security, Smooth & Rush-free Operation
STAR ROLLING® Flat Aluminium Security Roller Shutter is designed for everyday smooth and hassle-free operation.
An optional high-strength polycarbonate vision panel allows additional security and visibility.
Interlocking slats are made from extruded aluminium with AA6063 T5 high-density natural anodized aluminum finishing with a thickness of 1.0 mm. All tolerances for Shape And Thickness in accordance to JIS H 4100:1999 (Aluminium And Aluminium Alloy Extruded Shape) .Polycarbonate (3 mm thickness) Vision Panel can be added upon request.
Extruded high-density AA6063 T5 NA aluminum with inverted “T” profile fitted by nylon cushion for noise reducer. All tolerances for Shape And Thickness in accordance with JIS H 4100:1999 (Aluminium And Aluminium Alloy Extruded Shape)
Side Guide (Spring)
Extruded high-density AA6063 T5 NA aluminum with SRS-C50 Profile with a thickness of 2.0mm. All tolerances for Shape And Thickness in accordance with JIS H 4100:1999 (Aluminium And Aluminium Alloy Extruded Shape).
Side Guide (Motor)
SRS-G75 Profile with 1st grade high tensile (G500) galvanized steel with at least 2.0mm thick (based on material thickness). An optional wind lock system is recommended for roller shutters longer than 6000mm or at the strong wind load site.
1st grade 0.5mm hot-dipped steel or approved high-tensile galvanized steel finish surface casing cover secured into the casing structure with a self-tightening screw.
Measurement & Size
● Motor Operator (Recommended) -Single Phase AC220V / DC24V for normal usage ● Industrial Motor Operator - Single Phase AC220V / Three Phase AC340V for heavy-duty usage ● Spring Operator - Manual push / down for small size shutter ● Chain-block Operator - For less frequently used big size shutter